Корпус Microlab
БП FSP 400
Base Board Information
Manufacturer: Intel Corporation
Product Name: D865GLC
Processor Information
Family: Pentium 4
Manufacturer: Intel
ID: 29 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 2, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) 4 processor
Voltage: 3.3 V 2.9 V
External Clock: 200 MHz
Max Speed: 3060 MHz
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 AR [Radeon 9600]
03:02.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 0a)
[ 0.000000] Memory: 2046360k/2096316k available
[ 0.977951] scsi 1:0:1:0: CD-ROM TOSHIBA ODD-DVD SD-M1802 1030 PQ: 0 ANSI: 5
[ 0.980839] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 0.981362] scsi 2:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 01.0 PQ: 0 ANSI: 5
[ 0.981593] sd 2:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.000526] scsi 3:0:0:0: Direct-Access ATA ST3120026AS 3.05 PQ: 0 ANSI: 5
[ 1.000752] sd 3:0:0:0: [sdb] 234441648 512-byte logical blocks: (120 GB/111 GiB)
+79148828710, цена 1 тыр.
---------- Добавлено 20.08.2014 в 23:55 ----------
---------- Добавлено 21.08.2014 в 08:29 ----------
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family
Device Model: ST3120026AS
Serial Number: 3JT33PK9
Firmware Version: 3.05
User Capacity: 120*034*123*776 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Thu Aug 21 08:20:54 2014 IRKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 115) The previous self-test completed having
the read element of the test failed.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 85) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 060 048 006 Pre-fail Always - 101550880
3 Spin_Up_Time 0x0003 096 096 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 099 099 020 Old_age Always - 1716
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 089 060 030 Pre-fail Always - 902936751
9 Power_On_Hours 0x0032 058 058 000 Old_age Always - 37523
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 020 Old_age Always - 5175
194 Temperature_Celsius 0x0022 034 067 000 Old_age Always - 34
195 Hardware_ECC_Recovered 0x001a 060 048 000 Old_age Always - 101550880
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 571 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 571 occurred at disk power-on lifetime: 31751 hours (1322 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 01 1b 89 cd eb Error: UNC 1 sectors at LBA = 0x0bcd891b = 198019355
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 40 1a 89 cd eb 00 00:07:03.699 READ DMA
c8 00 08 d2 88 cd eb 00 00:07:03.699 READ DMA
ca 00 08 82 a9 63 eb 00 00:07:03.699 WRITE DMA
ca 00 08 12 a5 63 eb 00 00:07:03.699 WRITE DMA
ca 00 08 42 a0 63 eb 00 00:07:03.699 WRITE DMA
Error 570 occurred at disk power-on lifetime: 31751 hours (1322 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 04 16 89 cd eb Error: UNC 4 sectors at LBA = 0x0bcd8916 = 198019350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 48 12 89 cd eb 00 00:06:59.737 READ DMA
c8 00 08 ca 88 cd eb 00 00:06:59.737 READ DMA
ca 00 08 9a 98 63 eb 00 00:06:59.737 WRITE DMA
ca 00 08 b2 97 63 eb 00 00:06:59.736 WRITE DMA
ca 00 08 ca 96 63 eb 00 00:06:59.736 WRITE DMA
Error 569 occurred at disk power-on lifetime: 31751 hours (1322 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 0c 16 89 cd eb Error: UNC 12 sectors at LBA = 0x0bcd8916 = 198019350
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 d0 50 0a 89 cd eb 00 00:06:55.738 READ DMA
c8 d0 08 c2 88 cd eb 00 00:06:55.737 READ DMA
ca d0 08 9a ac 63 eb 00 00:06:55.737 WRITE DMA
ca d0 08 0a a5 63 eb 00 00:06:55.737 WRITE DMA
ca d0 08 92 a4 63 eb 00 00:06:55.736 WRITE DMA
Error 568 occurred at disk power-on lifetime: 31751 hours (1322 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 14 16 89 cd eb Error: UNC 20 sectors at LBA = 0x0bcd8916 = 198019350
---------- Добавлено 21.08.2014 в 08:30 ----------
smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar Blue Serial ATA family
Device Model: WDC WD3200AAKS-00L9A0
Serial Number: WD-WCAV2D034107
Firmware Version: 01.03E01
User Capacity: 320*072*933*376 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Aug 21 08:21:02 2014 IRKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (6000) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 73) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x3037) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 139 133 021 Pre-fail Always - 4025
4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2233
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0
9 Power_On_Hours 0x0032 075 075 000 Old_age Always - 18369
10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2222
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 244
193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2233
194 Temperature_Celsius 0x0022 110 077 000 Old_age Always - 33
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
